If you’ve been sending email campaigns for long enough, with out a doubt you’ve run into spam-filter issues. According to ReturnPath, you can expect 10-20% of your emails to get lost in cyberspace, mostly due to overzealous filters. Innocent email marketers who send permission-based emails to people who requested them get spam filtered all the time. Unfortunately, there’s no quick fix. The only way to avoid spam filters is to understand what spam is and how spam filters work. Even if you’re sending perfectly legal and engaging email newsletters, you need to have an understanding of the spam world. It will keep you out of trouble and make you a better email marketer. Now, let’s get started.
What Is Spam?
Spam is unsolicited email sent to a list of people. Let’s say you just bought a list of email addresses from some local business organization. Seems like these are great prospects for your business, right? You want to send them an email with a relevant offer they can’t refuse. Well, it’s spam if you send that list an unsolicited email. It’s not spam if you take that list and write personal, one-to-one emails to each recipient, and the content is unique for each recipient. If your immediate reaction is, “But, what if…” then you should stop now, because you’ll probably get yourself reported for spamming.
The CAN-SPAM Act of 2003
The United States federal CAN-SPAM Act became law on January 1, 2004. According to their website, the FTC says that if you violate the law, you could be fined $11,000 for each offense (multiply $11,000 times the number of people on your recipient list). ISPs around the country have already successfully sued spammers for millions and millions of dollars under this
law. We’re not lawyers, so we can’t give you too much legal advice, but if you send commercial email, you should read through the CAN-SPAM Act of 2003 and understand the rules. If you have a lawyer, consult with him to her. We’ll highlight a couple of key points:
If you’re sending commercial email (selling or promoting stuff):
- Never use deceptive headers, from-names, reply-tos, or subject lines.
- You must ALWAYS provide an unsubscribe link.
- Remove recipients from your list within 10 business days.
- The unsubscribe link must work for at least 30 days after sending.
- You MUST include your physical mailing address.
How Spam Filters Work
Spam filters look at a long list of criteria to decide whether your email is junk. They might look for spammy phrases like “CLICK HERE! ” or “FREE! BUY NOW!” They’ll assign points every time they see one of those phrases. Certain criteria get more points than others. Here’s a sample of criteria from SpamAssassin
- Talks about lots of money (.193 points)
- Describes some sort of breakthrough (.232 points)
- Looks like mortgage pitch (.297 points)
- Contains urgent matter (.288 points)
- Money back guarantee (2.051 points)
If your campaign’s total “spam score” exceeds a certain threshold, then your email goes to the junk folder. You’re probably thinking, “What’s the thresholdI need to stay under?” Sorry, but the number is different for every server. As for that list of “spammy” criteria, it’s constantly growing and adapting, because spam filters learn more about junk every time someone clicks the spam button in their email program. Spam filters even sync up with each other to share what they’ve learned. Although there’s no magic formula, we can help you avoid common mistakes that send newsletters to junk folders.
Avoid these common mistakes
These are the most common mistakes we see new email marketers make, which results in accidental spam filtering:
- Using spammy phrases, like “Click here!” or “Once in a lifetime opportunity!”
- Going crazy with exclamation points!!!!!!!!!!!!!!!
- USING ALL CAPS, WHICH IS LIKE SCREAMING AT THE TOP OF YOUR LUNGS VIA EMAIL (especially in the subject line)
- Coloring fonts bright red or green
- Coding sloppy HTML, usually from converting a Microsoft Word file to HTML
- Creating an HTML email that’s nothing but one big image, with little or no text (since spam filters can’t read images, they assume you’re a spammer that’s trying to trick them)
- Using the word “test” in the subject line (agencies run into this when sending drafts to clients for approval)
- Sending a test to multiple recipients within the same company (that company’s email firewall can only assume it’s a spam attack)
- Designing HTML email in Word and exporting the code to HTML (That code is sloppy, and spam filters hate it.
Preventing False Abuse Reports
You don’t have to be a spammer to get reported for spamming. In fact, we’ve found that totally clean lists that are 100-percent double opt-in will get one or two abuse reports per 50,000 recipients. Sometimes it’s a simple mistake, like when an inexperienced user clicks the spam button as an easy way to unsubscribe from an email.
But even if it’s a mistake, getting reported for abuse is serious. If a major ISP like AOL receives even a small handful of complaints about your emails, then they’ll start blocking all email from your server. And if you use an email-marketing service, that means your emails can affect the deliverability of thousands of other legitimate marketers. One bad apple can truly spoil the whole bunch.
And since it’s inevitable that you’ll receive spam complaints every now and then, ESPs are constantly monitoring abuse reports from ISPs, blackhole lists, and anti-spam networks, so they can immediately pinpoint problems as they arise and re-distribute email delivery to different servers and IP addresses while they investigate the account in question.
When you receive an abuse report, you’re kind of “guilty until proven innocent.” All the major ISPs care about is reducing unwanted email for their customers. There’s no negotiating, and they don’t have time to listen to excuses or long-winded explanations. And who can blame them? They’re too busy trying to handle countless other spam complaints.
How abuse reports work
When people receive what they think is spam or junk, they can just click a button in their email program to label it as spam. When they do that, an abuse report is often created and sent to their ISP. If their ISP receives enough of these reports, they fire off an automated warning message to the sender. If you’re using an ESP, they are that sender. So their abuse staff receives these warning messages. Usually, the report is very terse. It hides the identity of the person who complained and usually includes a copy of the email you sent, plus something like: Hi. Our customers are complaining about your emails. You need to address this issue ASAP, or we’ll start blocking all email from your servers. If the complaints continue within a certain timeframe, that’s it—all email from that particular IP address of the sending server is blocked, at least temporarily. Scary. That’s why ESP’s are constantly monitoring incoming complaints, and it’s why most have human reviewers to approve new accounts before they’re allowed to send campaigns. It’s why also why ESP’s monitor their outgoing mail queue all the time, and why you might hear from one of their reviewers with tips on how you can make your email less spammy.
Reasons for false abuse reports
So why do legitimate email marketers get falsely accused of sending spam? Sometimes it’s a mistake. But more often than not, it’s the marketer’s own fault. Here are some common reasons marketers get accused of sending spam:
- The marketer collected emails legitimately (through an opt-in form on their site), but took too long to contact her list. People receive full-blown email
- newsletters out of the blue and don’t remember opting in two years ago.
- The marketer runs an online store. They’ve got thousands of email addresses of customers who have purchased products from them in the past. Now they want to start emailing them. Instead of asking people to join the email-marketing list, they just start blasting offers.
- The marketer is exhibiting at a trade show. The trade-show organization provided the marketer with a list of attendee email addresses. Instead of emailing those people an invitation to join their list (along with a little explanation about how they got their emails from the tradeshow), the marketer assumes they have permission, and starts emailing full-blown newsletters and promos.
- Fish bowls and business cards. Yep, we’ve all dropped our business cards into a fish bowl somewhere to win a free lunch or a door prize. To marketers, it’s common sense that the fish bowl is a list-collection technique. To prospects, it’s just a shot at a free lunch.
- Purchasing or renting members’ email addresses from an organization, then just adding them to their list without getting permission.
- There’s a common theme here. In all of the above cases, the missing element is permission. The marketers are caught up in legal rules and definitions. But it’s not enough to be legal—you’ve got to be polite, too. So now you understand what abuse reports are and know why emails get reported. Now let’s get into how to prevent them.
Ways to prevent false abuse reports
- Even if they’re your customers, don’t send promotion s without getting permission first. Set up a separate marketing list for customers to join. T ell them you’re about to start up a great email newsletter or promotions program, and give them reasons to sign up.
- Don’t hide your opt-out link. It should be prominent . People who no longer wish to receive your emails are either going to unsubscribe or mark you as spam. Which would you prefer? Some folks even place the unsubscribe link at the top of their emails, so it’s super easy to find .
- Make sure your email looks reputable. If you’re not a designer, then hire one. Your email needs to look like it came from your company, not some scammer who’s phishing for information. If your email looks unprofessional, who’s going to trust your unsubscribe link?
- Set expectations when people opt-in to your list. If people sign up for monthly newsletters but you also send them weekly promotions, they’re probably going to report you for spamming. Tell them what you’ll be sending and how often. Set up different lists (one for newsletters, one for special offers and promotions). Understand that there’s a difference between soft-sell newsletters and hard-sell promotions. Don’t mix them up.
- Use the double opt-in method. If you use double opt-in, you have proof that each and every recipient gave you permission to send them emails. Period.
- Don’t wait too long before contacting your subscribers. We’ve seen lots of small businesses collect emails at their storefront, but then wait more than three months (sometimes years) before contacting their customers. Too often, it’s with a coupon offer during the holidays (when recipients are already getting overwhelmed with offers from other online merchants). Set up a process where new subscribers receive emails from you right away.
We highly recommend the double opt-in method when managing your email lists. Here’s how it works:
- A customer signs up for your email newsletter through a form at your website.
- She receives an email with a confirmation link.
- If she clicks the link, she’s added
- If she doesn’t click the link, she’s not added to the list.
Double opt-in is fast replacing the single opt-in method, where someone submits a form, and bam—they’re added to a list. There are too many chances for someone to get signed up without permission, either erroneously or maliciously. And there’s no need to even discuss the old opt-out method anymore. That’s getting phased out, due to all the spam complaints marketers get from people who never saw the opt-out check. Don’t be so desperate to grow your list that you put your company’s reputation on the line.
By now, most email marketers know to avoid using spammy phrases like “FREE! CLICK NOW!” or the spam filters will trash your message. But did you know that before your email gets to a spam filter, it has to get through a gatekeeper? Spam is so bad that spam filters now need spam filters.
They’re all over the place. ISPs use them. Large corporations use them. Small businesses are starting to use them. What’s scary is they all talk to each other. It’s how they learn what spam is, and who should be blocked.
If IronPort’s Email Security Appliance thinks your email is spam, it’ ll gobble it up and shoot its remains into cyberspace before your recipient’s puny spam filter even gets a chance to look for the word V1AGRA. It won’t even waste the energy to tell anybody about it (like in a bounce report).
Ever send to your email list and wonder where 5-10% of the emails seem to go off to? Ever wonder why the numbers don’t seem to add up in your deliverability reports? It was probably one of these big, mean appliances. How does this server know what spam is? Your own recipients teach it. When you send an email to your list, and someone on your list thinks it’s spam, or doesn’t remember opting-in to your list, or if you purchased a list, that person can report you to SenderBase. Get enough complaints, and they’ll propagate your data to all the IronPort servers around the world, letting everyone know you’re a spammer.
Incidentally, your ESP should be registered at SenderBase, so they can properly investigate every complaint generated in response to their users’ campaigns. IronPort is only one of many email firewalls, gateways and security appliances you should learn about.
All of those gatekeepers rely on reputation scores to block emails before they even get to the content-based spam filters. They all calculate reputation differently. So you better make sure your reputation is good by sending clean emails to clean lists.
If you think you can send junk, get reported, then switch to a new email server, you’re sadly mistaken. Once you get reported, your company’s name and domain name are on the lists. They’ll know to block ALL emails with your name in it from now on—no matter who sends it or where it came from. This is why affiliate-marketing programs can be so risky. Imagine thousands of sloppy email senders (your affiliates) buying lists and sending emails with your company’s domain name in them.